Chery QQ3, User Manual

Page: 58 / 184

Instruments and control devices
49
ABS warning light
With ignition switch is turned on, ABS
indicator light will light up for about 4
seconds before it goes out.
With ignition switch turned on, if the
ABS light is not lit or remains on, contact
the nearest CHERY authorized service
station.
If ABS light is lit up during driving, there
is a fault in ABS system With ABS not
working, if the brake system functions
properly, go to the nearest CHERY
AUTO authorized service station for
inspection.
Generator warning light
It indicates a discharge of vehicle battery.
With ignition switch turned on, the light
will light up and goes out after engine is
started. If the light goes on during driving,
the following steps should be taken:
·
Park the vehicle at roadside.
·
Check generator belt for slackness or
cracks.
·
If generator belt is normal, there may be
failure in charging system. Isolate the
problem and correct it as soon as possible
and to the nearest CHERY AUTO
authorized service station for a system
inspection immediately.
！
Notice
If the generator belt is too loose, the
generator sup erheating may be caused
and subsequent damage may happen to
the generator. Therefore, the generator
belt should be inspected regularly.
Safety belt warning light
With ignition switch in "II" position,
safety belt warning light will come on
unless driver fastens safety belt.