Chery QQ3, User Manual

Page: 104 / 184

Emergency situation
95
Emergency situation
Driver's tool
、
Spare tire
Driver's tool and spare tire are all stored
in the place for spare tires under luggage
compartment floor.
Type of Jack Scalable
M aximum
operating load 600kg
Lubricant type Lithium typ e
！
Notice
1
、
Attach spare tire and driver's tool
tightly so as to prevent injures in the case
of emergent braking or accident2
、
The
jack supplied here is only applied for the
specified vehicle and not allowed to
support any other vehicle or weight;3
、
After vehicle is jacked ,engine is not
permitted to start in case accident should
happen.;4
、
If some operations must be
done under vehicle, be sure to support
vehicle securely with proper brace.
Wheel replacement
To avoid accident , following suggestions
should taken when a tire needs to be
replaced:
·
Drive vehicle out of driveway
to clear safe area .
-Park vehicle on horizontal road.
-Turned off ignition switch and remove
ignition key.
-Turn on hazard warning flashlight and
apply hand brake, put transmission in "
1"gear or "R" gear if necessary.
-Apply a wedge after or before the wheel
diagonal to the wheel which is to be
replaced to guard v ehicle.
-Set a trigonometry warning plate 10m
away from vehicle.
-Have all passengers out of vehicle to
safe area.
Replacement steps
-Remove wheel cover.
-Loosen all wheel bolts a full turn with
wheel spanner, but do not remove bolts
before wheel is lifted from ground.
-There are recesses in the front and rear
bottom of vehicle for mounting jack.
Jacking points are marked by semicircle
cuts. Locate jack vertically near the front
or back of the wheel which is to be
replaced. Turn jack bolt clockwise by
hand unt il jack h ead cont acts chassis..