
INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
REAR SEAT POWER
WINDOW SWITCH
ADJUSTING SWITCH
OF
POWER
EXTERIOR
REAR
VIEW MIRROR
The power rear view mirror can be
regulated through the adjusting switch at
driver side. The adjusting switch can only
work after ignition switch has been turned
to the “II” position.
The exterior rear view mirror at left side
can be regulated by turning the adjusting
switch counter-clockwise to the “L”
position; the exterior rear view mirror at
right side can be regulated by turning the
adjusting switch clockwise to the “R”
position.
When the control switch is turned left or
right to the proper position, pushing the
switch foreword, backward, leftward and
rightward can respectively adjust the
position of mirror surface upward,
downward, leftward and rightward. The
switch should be turned to the mid
position once more after the proper
adjustment.
If necessary, for example, in a narrow
space, you can pull the exterior rear view
mirror by hand and fold it back for about
90°. To restore it to original position,
directly pull the exterior rear view mirror
outwards for a certain angle and it will
automatically
return.
Summary of Contents for A1 2008
