
INTRODUCTION OF FUNCTIONS AND DESCRIPTION OF INDICATIONS OF THE VEHICLE
If fail to start, the ignition key must be
turned to position “B” before restart, and
then turn it to this position. After the
engine starts, release your hand and the
key will spring back to the “II” position.
ADJUST
STEERING
WHEEL
To drive your car safely and comfortably,
sometimes the height of steering wheel
needs to be adjusted. At this time, pull the
adjusting handle under steering column
cover down to release it, and then the
steering wheel can move up and down.
After the steering wheel has been adjusted
in place, pull the adjusting handle up to
locking position to lock position of the
steering wheel.
Horn
Push the push-pad marked with “
” on
the steering wheel down and the horn will
flute immediately. While the ignition
switch is off, the horn can still be
operated.
WINDSHIELD WIPER
& WASHING SYSTEM
Once the engine starts, be
sure to release the key immediately.
Do not stay at the “III” position too
long.
Summary of Contents for A1 2008
