TM-G746A Rev.: B
DCR# 17-0231
DATE: 3/21/17
Federal Identification Code: 11815
© 2017 Cherry Aerospace
5
OPERATING INSTRUCTIONS
Before using the tool:
CAUTION
•
Read the tool manual instructions; before first using the tool.
•
Read and comply to all safety instructions given in this document in addition to the general safety rules applicable
•
Make sure the tool is connected to an air source operating within the recommended pressure range
•
Before installing the permanent fasteners, make sure that the structure is properly clamped with temporary fasteners
•
Make sure that the correct pulling head is selected for the fastener to be installed and that the tool is in good working condition
Installing Fasteners:
Place the fastener into the prepared hole then place the pulling head over its stem and depress the trigger.
PULLING HEAD SELECTION FOR BLIND FASTENERS
•
The lists given below are for reference only; for more up to date and detailed information, please check on the Cherry
Aerospace webpage as following:
Installation Tooling Manuals
(links to current tool manuals) and
Product Expert
(interactive
database for tool recommendations)
Fastener Type
Part Number
PH to use
Type
Adapter
Rivet Diameters
Max. Grip
1
CherryMAX
®
Bulb
(CR3XXX)
Cherry SST
(CR6XXX)
H701B-456
Straight
NONE
-4, -5 & -6
2
All
H747-456
5
NONE
-4, -5 & -6
2
All
H753A-456
5
Right Angle
NONE
-4, -5 & -6
2
All
H781-456, H781A-456
Offset
NONE
-4, -5 & -6
2
All
H782
NONE
-4, -5 & -6
2
All
CherryMAX
®
AB
(CR4XXX)
H701B-456
Straight
NONE
-4, -5 & -6
2
-09
1
H747-456
5
NONE
-4, -5 & -6
2,3
-09
1
H753A-456
5
Right Angle
NONE
-4, -5 & -6
2,3
-04
H781-456, H781A-456
Offset
NONE
-4, -5 & -6
2,3
-07
1
H782
NONE
-4, -5 & -6
2,3
-07
1
MaxiBolt
®
S
(CR7XXXS)
H701B-456
Straight
NONE
-4 only
All
H747-456
5
NONE
-4 only
All
H753A-456
5
Right Angle
NONE
-4 only
All
H781-456, H781A-456
Offset
NONE
-4 only
All
H782
NONE
-4 only
All
MBC L/C
(Lock Creator)
H701B-456
Straight
NONE
-4, -5 & -6
-042
H747-456
5
NONE
-4, -5 & -6
-042
H753A-456
5
Right Angle
NONE
-4, -5 & -6
-04
H781-456, H781A-456
Offset
NONE
-4, -5 & -6
-042
H782
NONE
-4, -5 & -6
-042
MBC
(No Lock Creator)
H746-4MBC (0R 5MBC, 6MBC)
Straight
None
-4, -5 OR -6
-042
CherryLock “A”
(CR2X7X)
H747-3A
Straight
NONE
-3 ONLY
-042
H955-3 (or -4, -5, -6)
NONE
-3, -4 & -5
3
-042
H886-3 (or -4, -5, -6)
Right Angle
NONE
-3, -4 & -5
3
-04
MS
4
(CR9XXX)
NPR
(CCR274,
CCR284)
SPR
(CR1233)
Tacking Rivet
(CCR294, CCR304)
H747-3NPR, H902-3NPR
Straight
NONE
-3 DIA. ONLY
All
H902-4NPR
NONE
-4 DIA. ONLY
All
H9015-3C (or -4C, -5C, -6C)
704A9
-3, -4, -5 & -6
All
H9040-4C (or -5C, -6C , -8C)
704A6
-4, -5, -6 & -8
All
Notes:
1
Longer grips may require a second activation of the trigger.
2
Nominal and oversized diameters.
3
Alloy Steel and Monel only; no -6 diameter (3/17) Aluminum.
4
Serrated stems only.
5
This tool may be set-up to install other types and sizes of fasteners; see Tool Manual for details.
