TM-G746A Rev.: B
DCR# 17-0231
DATE: 3/21/17
Federal Identification Code: 11815
© 2017 Cherry Aerospace
4
GENERAL OPERATION and SAFETY WARNINGS
•
Wear proper PPE
(Personal Protection equipment)
when operating, servicing or repairing this tool
•
Read Manual; operators must be trained in safety and correct tool operation
•
Service and repairs shall be performed only by trained personnel.
•
Do not pull rivet in the air or directed at any person.
•
Do not use the tool with a damaged or missing stem deflector
•
Rotate the Stem Deflector facing away from the operator or critical aircraft structure; use
a Stem Catcher if possible.
•
Do not pound on the rear of the tool head to force rivets into holes.
•
Make sure that the air muffler is not obstructed and is directed away from people.
•
Do not exceed the recommended air pressure.
To ensure safety, use the pre-set air pressure regulator P/N P1505.
•
Make sure to disconnect from the air supply before service or repair.
•
Wash thoroughly after handling hydraulic fluid.
•
Unauthorized modifications, including using substitute components will void warranty
and shall be at the customer's entire responsibility.
•
Do not use any substitutions as they will impact the tool safety and reliability life.
