8
Analog Output Setup
Analog Output 1.8 typically comes from factory setup as detailed below (mapped to Free or Total Chlorine) with
the Maximum scaling set to equal the chlorine probe’s full range (e.g. 2, 5, or 10 mg/l). If more than one sensor
or analog output was supplied, the user should verify the settings before wiring. User can change the mapping
and output scaling if desired. Note: Press the Next button to navigate through the 3 setup screens shown below.
Relay Setup
Example settings provided below that will result in Relay #8 closing when any alarm on the HydroACT analyzer or
Chlorine probe goes active. See HydroACT manual for other relay programming options.
1
1
2
3
2
3
