1.
Laminating Pressure Gauge: Displays the line pressure of the laminator. Pressure can be
adjusted using the pressure control located directly behind the laminating pressure gauge
on the back of the cabinet.
2.
Emergency Stop button: Push the emergency stop button to cut off electricity to the
laminator and immediately open the laminating nip. Turn the button clockwise to
disengage and restore power to the laminator.
3.
Speed control: Turn clockwise to increase speed or counter-clockwise to decrease speed
of laminator rolls.
4.
Open Nip button: Push the open nip button to open the laminator nip.
5.
Close Nip button: Push the close button to close the laminator nip.
6.
Jog button: Push and hold the jog button to rotate the bottom the laminator roll. Release
the button to stop the bottom laminator roll from rotating.
7.
Forward/Reverse button: Push the button to forward or reverse to control the direction the
bottom laminator roll will rotate.
8.
Continuous/Stop/Job button: Push the button to continuous, stop, or jog to control the
bottom laminator rolls rotation. Continuous will allow the bottom roll to rotate
continuously. Stop will not allow the bottom roll to rotate. Jog will allow the bottom roll
to rotate when the jog button is pushed and held.
9.
Pressure Regulator (not pictured): Turn the regulator knob counter-clockwise to increase
press and clockwise to decrease pressure at the laminator nip.
14
