•
7
•
Chemical Concepts | 410 Pike Road, Huntingdon Valley, PA 19006 | Made in USA
www.chemical-concepts.com
|
800.220.1966
|
KEEP-NUT™
DRILLING MACHINE
MANUAL
Specifications
Air Pressure..................................................85 PSI
Air Consumption.....................................16 CFM
Weight........................................................4.84 lbs
OVERVIEW:
Special Features
The
KDM110
has a number of special features. The unit is
designed to power both the pneumatic drill/polisher and the
vacuum base using a single airline. The Venturi vacuum base
was designed to deliver powerful suction to hold the unit
securely in place even on rough and textured materials such
as the underside of granite and ceramic surfaces in wet or
dry conditions. The vacuum base allows the unit to be
operated in a vertical or horizontal positions, provided
sufficient air pressure and volume is available. The vacuum
base also has a convenient quick release system to allow the
user to quickly reposition the unit without shutting off the
air line. Simply cover the small circular opening located on
the front of the Venturi block (19) with your finger and the
suction will be temporarily disengaged. The front of the unit
has a slot to accept a wrench allowing the user to change
drill bits without removing the polisher from the base. Simply
slide the included wrench into the slide and engage the
spindle on the
Alpha Air-680C
. This will prevent the spindle
from rotating. You can then use the appropriate wrench to
attach/remove your drill bit. Lastly the
KDM110
has an
integrated depth stop that allows a predetermined depth
to be set for repeatable, accurate drilling.
Equipment Included
Alpha Air680C........................................................................1 pc
Non-coring Drill Bit
( 11.8mm) (CCH-KNBITGRI-11.8MM)
...…1 pc
Split Stop Collar
(
1/2
”
)
...........................................................1 pc
KEEP-NUT™ 5 x 8_Drill Manual AV.indd 7
9/17/19 2:01 PM