•
15
•
Chemical Concepts | 410 Pike Road, Huntingdon Valley, PA 19006 | Made in USA
www.chemical-concepts.com
|
800.220.1966
|
KEEP-NUT™
DRILLING MACHINE
MANUAL
5
11. ALWAYS SECURE WORK PIECE. Use clamps or a vise to hold work.
It’s safer than using your hand and it frees both hands to operate tool.
12. DON’T OVERREACH. Keep proper footing and balance at all times.
13. DISCONNECT TOOLS WHEN NOT IN USE. Always disconnect
tool before servicing; when changing accessories such as grinding
wheels, backer pads, etc.
14. REMOVE ADJUSTING KEYS AND WRENCHES. Form a habit of
checking to see that keys and adjusting wrenches are removed from
tool before turning it on.
15. MAINTAIN TOOLS WITH CARE. Keep tools clean at all times for
best and safest performance. Follow instructions for lubricating and
changing accessories. Keep handles dry, clean and free of oil or
grease. Inspect moving parts for alignment and binding as well as
for breakage and improper mounting.
16. AVOID ACCIDENTAL STARTING. Do not carry a “connected” tool,
or make adjustments, or change discs without making sure the tool
is disconnected from the air supply.
17. USE ONLY RECOMMENDED ACCESSORIES. The use of any
accessories other than what is listed or recommended for this
particular tool may be hazardous.
18. KEEP HANDS AWAY FROM ALL MOVING PARTS.
19. USE SIDE HANDLES. Supplied with tool for control and safety.
20. STAY ALERT. Watch what you are doing and use common sense.
Do not operate tool when you are tired, or under the influence of
medication or alcohol.
KEEP-NUT™ 5 x 8_Drill Manual AV.indd 15
9/17/19 2:01 PM