Chelsio Communications Terminator 6, Installation And User Manual, Page: 114 / 432

Chapter VI. WD-UDP
Chelsio Unified Wire for Linux 114
#
# Syntax:
#
# endpoint {attributes} ...
# where attributes include:
#
interface = interface-name
# port = udp-port-number
# vlan = vlan-id
# priority = vlan-priority
#
# e.g.
# endpoint {
#
interface=eth2.5
# port = 8000 vlan = 5 prio rity=1
# }
# endpoint { interface=eth2 port=9999}
#
# endpoints that bind to port 0 (requesting the host allocate a port)
# can be accelerated with port=0:
#
# endpoint {interface=eth1 port=0}
#
Assume your Terminator interface is eth2. To accelerate all applications that preload
libcxgb4_sock using eth2, you only need one entry in
/etc/libcxgb4_sock.conf
:
endpoint {interface=eth2 port=0}
If you have eth2 and eth3 configured for example, you can define certain endpoints to eth2 and
others to eth3:
endpoint {interface=eth2 port=9999}
endpoint {interface=eth3 port=8888}
For VLAN support, create your VLANs using the normal OS service (like vconfig, for example),
then add entries to define the VLAN and priority for each endpoint to be accelerated:
endpoint {interface = eth2.5 port=10000}
endpoint {interface = eth2.7 priority=3 port=9000}