Electric Induction hobs Chef’s EH-MIX544 / 545
29
Normally, in a normal cooking, the disturbance takes a few seconds. The ECOOK
includes a filter to don’t show the “U” so easily, this means, the protection actuates
but “U” is not showed just with one short disturbance. The decision to show “U” is
taken after a defined nº of disturbance pulses.
19. Errors/Alarms
When an error is detected, the whole appliance or the heater/s are switched off,
a beep sounds (only if one or more heaters are active) and all displays show a ‘F’
letter and the error code alternately.
While in error status the keys of the corresponding heaters are not operative.
Except EEPROM and microcontroller errors, all errors are recoverable. That is,
when the cause of the error disappears all displays are deactivated and the cooktop
returns to normal operation.
Fault/Error
(Visualization
Priority Order)
Heater
Displays (fore
0.5 sec./ back
0.5 sec)
Efect in
the
applian
ce
Normal status
recovery
Microcontroller fault
F0
App. off
-
-
-
On/Off key emitter fault
FA
App. off
When the fault
dissapears
On/Off key receiver fault
FC
App. off
When the fault
dissapears
User interface temperature sensor
short-circuit
FE
App. off
When the fault
dissapears
User interface temperature sensor
open-circuit
Ft
App. off
When the fault
dissapears
User interface overtemperature
Fc
App. off
When user interface
temperature < T
EEPROM fault
FH
App. off
-------
