4.4.
MINUTE MINDER
This function is a minute minder alarm independent of oven control. Press the
“M”
button once (if meat
probe connected, twice).
symbol starts flashing, set the desired minute minder duration by pressing the
timer minus to decrease or the timer plus to increase. The maximum allowed setting is 23 hours 59 minutes.
After a few seconds screen will stabilize, flashing will stop, adjustment is completed. After the programmed
duration is elapsed the buzzer will sound,
will flash and can be reset by any button press. The Alarm
sound will stop after 7 minutes if no button presses, whereas the flashing
symbol will be present until a
button press occurs.
4.5.
COOKING TEMPERATURE ADJUSTMENT
Temperature can be adjusted at any function other than lamp and defrost (The default Temperature will
be shown on the Temperature Display)
1.
Press the
(°C)
button once. The
“°C“
symbol on the Temperature display will start flashing.
2.
Using Temperature minus and/or plus buttons, adjust the Temperature between 40-250 C . The
adjusted value will be shown on the Temperature display.
In case of changing the cooking function (by rotating the cooking function selector), the setting will be
cancelled and the default Temperature of the new function will be shown on the display.
4.6.
CHANGING THE ASSIGNED DEFAULT OVEN TEMPERATURE
The default Temperature for any cooking function (except lamp and defrost) is 200°C. This assignment
can be changed permanently, as follows:
1.
Adjust the cooking Temperature performing the 2 steps described in the above paragraph.
2.
Press and hold the Temperature adjustment button (
°C)
for 3 seconds until a beep sound is heard.
The value seen on the Temperature display is now assigned to the active cooking function
permanently.
Note: To reactivate the factory settings, press and hold the Temperature plus and minus buttons
simultaneously for 3 seconds until a beep sound is heard. The default Temperatures assigned to any cooking
function will be set back to 200°C.
4.7.
MANUAL COOKING
Once a function is selected, cooking starts immediately and the default Temperature assigned to this
function (if any) - shown on the Temperature Display - will be valid. Cooking will continue until the
cooking function selector is brought to any of 0 (off), 1 (lamp) or 2 (defrost) positions. Maximum allowed
cooking duration is 10 hours, Exceeding this duration will result in an Error indication
(See:4.12. Error
Indications).
4.8.
AUTOMATIC COOKING
Automatic cooking means, that cooking will end automatically according to the set parameters
(See.:
4.8.1, 4.8.2 and 4.8.3).
4.8.1.
HALF AUTOMATIC COOKING
Cooking will start immediately and goes on for the duration programmed.
1.
Select the desired cooking function and adjust (if needed and allowed) the temperature as
described before in this document.
2.
Press the
“M”
button twice.
symbol starts flashing.
3.
Adjust the desired cooking duration by pressing the timer minus to decrease or the timer plus to
increase.
symbol appears on the timer display.
4.
After a few seconds, the flashing
will disappear, adjustment is completed.
Summary of Contents for EH-BO1107S
Page 28: ......
