4
5
NOTES ON THE PLUG
This appliance has a grounded 3-prong plug. Connect to a properly
grounded outlet only. If the plug does not fit fully into the outlet, contact
a qualified electrician. Do not attempt to modify the plug in any way.
G
W
CHP-40
–
120V 1440W; NEMA 5-15P Plug ; ETLus APPROVED
ELECTRIC POWER
If the electrical circuit is overloaded with other appliances, your
appliance may not operate properly. It should be operated on a
separate electrical circuit from other appliances.
PARTS
OFF
Figure 1
Single Hot Plate
1.
Single Burner
2.
Burner Ring
3.
Heating Control Dial
4.
Power Light
5.
Stainless Steel Base
6.
Non-Skid Feet
7.
120V 3-Prong Plug (not shown)
1
2
3
4
5
6
7
BEFORE USING FOR THE FIRST TIME
1. Carefully unpack the Hot Plate and remove all packaging and materials.
2.
Place the Hot Plate on a dry, clean and flat surface.
3. Make sure the heating control dial is in the OFF position.
Plug the Hot Plate into a 120V AC 3-prong electrical outlet.
4. Turn the heating control dial to HIGH. The red power light will illuminate.
5. Allow the Hot Plate burner to operate empty for 10 minutes to burn off any
manufacturing residue.
NOTE:
You may notice a slight odor; this is normal and should quickly disappear.
The burner may appear to turn red if no pot or pan is placed on the hot plate
during the heating process.
IMPORTANT:
With the exception of the initial burn-off, NEVER turn any burner
ON without placing a pot or pan onto the heating plate.
OPERATING INSTRUCTIONS
IMPORTANT:
Use pots and pans that are flat and stable with a base size no larger
than the heating plate.
CAUTION:
Avoid using pans that are unstable and easily tipped.
CAUTION:
Avoid dropping items onto the heating plate.
1. Wipe excess water/condensation off pots, lids, and utensils prior to use.
Place pots and/or pans in the center of the burner.
2. Make sure the heating control dial is in the OFF position.
Plug the Hot Plate into a 120V AC electrical outlet.
3. Turn the heating control dial to select from 4 heating mode selections:
WARM, LOW, MEDIUM and HIGH. The red power light will illuminate.
4. When cooking is complete, turn the heating control dial to OFF,
then remove the plug from electrical outlet.
CAUTION:
Make sure hot pots or pans do not touch the base, as this could
damage the surface.
SO-315338_18077_Chef-Built_Single Hot Plate_CHP-40_Sensio_IM_R6.indd 4-5
2018-08-31 8:48 AM