Cheetah cl-360x, Instruction Manual

Page: 6 / 17

- 07 - - 08 -
(1) Flash tube*1 (2) Protecting bag*1 (3) Mini stand*1 (4) Off-camera adapter*1 (5) Reflector*1 (6) Power cable*1
(7) Reflector diffuser*2 (8) Instruction manual*1
The product can be used in combination with the following accessories sold separately, so as to achieve best
photography effects:
X1C Wireless Flash Trigger, CL-Tx/Rx Remote Control, Softbox, Beauty Dish, Fold up umbrella, Snoots,
Light stand, etc.
1
3
5
7
6 4
Name of Parts Name of Parts
Included Accessories
Separately Sold Accessories
Installing Reflector (Other Accessories)
1 . Rotate Accessory Locking Ring
ounter-clockwise until it is loosen.
2 . Insert the reflector into the Accessory
Mount.
3 . Rotate Accessory Locking Ring
clockwise to lock it up. Do not
over-tighten.
Attaching Flash Tube
1 . Remove the reflector or other
accessories from the flash head.
2 . Match the red dot on the base of the flash tube with the red dot in the Tube
Socket. Push the flash tube in until it is securely seated into the socket.
1 . Before connecting, make sure that
the power pack is turned off.
2. Plug one end of Power Cable into
Power Socket of the flash unit, and
insert the other end into the output
socket of the power pack.
3 Turn on the power pack. Normally
the flash unit will be fully charged
and ready to work.
The flash unit is not powered by itself, but draws power from CHEETAH power pack L4500 (sold separately).
For the instructions of the power pack, see the related user manual.
Connecting to a Power Pack
Flash Duration
RATIO : Flash ratio
: Master unit flash ON
: Master unit flash OFF
Firing group
Flash mode
: Group flash (radio transmission) Gr
Channel
: Master
: Radio transmission wireless shooting
: Optic transmission wireless shooting
(4) Radio Transmission Shooting/Optic Transmission Shooting
● Master Unit
●
Slave Unit
: Slave
: Slave icon