Cheetah cl-360x, Instruction Manual

Page: 10 / 17

- 15 - - 16 -
● Even if the master unit flash firing is disabled, it still fires a preflash to transmit wireless signals.
2
.
Master Unit's Flash OFF
When the master unit is set to OFF, only the slave units will fire a flash.
Press Function Button 4 so
1
that < > is displayed on
the LCD panel.
3
.
Setting the Communication Channel
If there are other wireless flash systems nearby, you can change the channel IDs to prevent signal interference. The
channel IDs of the master unit and the slave unit(s) must be set to the same.
Press Function Button 4 so
1
that < > is displayed on
the LCD panel.
Press Function Button 1 so that
2
< > is displayed on the
LCD panel. Turn the Select Dial
to choose a channel ID from 1
to 4.
Press the < SET > button to
3
confirm. CH
MENU3
Press Function Button 1 < > to
2
control the ON/OFF of the master unit.
< >
：
The master unit flash firing is ON.
< > ： The master unit flash firing is OFF.
ON/OFF
MENU2
This product supports wireless flash application and functions as either a master or a slave unit. As a
master unit, it can control Canon speedlites e.g. 580EXII, 600EX-RT via wireless. As a slave unit, it can
receive wireless signals of Canon speedlites e.g. 580EXII, 600EX-RT and commanders of Canon cameras
e.g. 7D/60D/600D.
●
You can set up two to three slave groups for E-TTL II autoflash shooting. With E-TTL II autoflash, you can easily create various
lighting effects.
●
Any flash settings (of flash exposure compensation, high-speed sync, FE lock, FEB, manual flash, Multi flash) on the master unit will
be automatically sent to the slave units. So the only thing you need to do is to set the master unit to ETTL mode without any
operation for the slave units at all during the shooting.
●
This flash can work in ETTL autoflash, M manual flash, and Multi stroboscopic flash modes when set as a master unit.
Positioning and Operation Range
1
.
Wireless Settings
You can switch between normal flash and wireless flash. For normal flash shooting, be sure to set the wireless
setting to OFF.
Indoors
Outdoors
15
m
( 49 . 2
ft
)
10
m
( 32 . 8
ft
)
80°
8
m
( 26 . 2
ft
) 12
m
( 39 . 4
ft
)
Wireless Flash: Optic Transmission
●
Even with multiple slave units, the master unit can control all of them via wireless.
● In this user manual, "master unit" refers to the camera flash on a camera and "slave unit" will be controlled by the
master unit.
Press < > button so that < >
or
< >
are displayed on the LCD panel.
Master Unit Setting
Press < > button again so that < > or
< > are displayed on the LCD panel.
Slave Unit Setting
Wireless Flash: Optic Transmission