Cheetah cl-360x, Instruction Manual

Page: 13 / 17

- 21 - - 22 -
Wireless Flash Shooting: Radio (2.4G) Transmission
Using a flash (master/slave) with a radio transmission wireless shooting function make it easy to shoot with
advanced wireless multiple flash lighting, in the same way as E-TTL II autoflash shooting.
The basic relative position and operation range are as shown in the picture. You can then perform wireless E-TTL II
/ETTL autoflash shooting just by setting the master unit to <
ETTL
>.
CL-360X
C
adopts CHEETAH 2.4G wireless X system, which can be used in combination with other products in our
factory.
As a slave unit, CL-360X
C
is compatible with Canon E-TTL II and Nikon i-TTL systems. It will automatically change
its system according to the master unit instead of setting by manual. Once received the master unit’s signal,
"Canon" or "Nikon" is displayed the LCD panel.
Nikon cameras (use X1T-N) and Canon cameras (use X1T-C) can use one or more CL-360X
C
flashes
simultaneously.
* As master unit, CL-360X
C
can control the following slave units: CL-360X
C
, CL-360X
N
, X1R-C, etc.
* As slave unit, CL-360X
C
can be controlled by the following master units:
Positioning and Operation Range (Example of wireless flash shooting)
● Autoflash Shooting with One Slave Unit
● Use the supplied mini stand to position the slave unit.
● Before shooting, perform a test flash and test shooting.
● The transmission distance might be shorter depending on the conditions such as positioning of slave
units, the surrounding environment and whether conditions.
Transmission distance is about 70m
You can directly operate the slave unit to manually set the manual flash or stroboscopic flash.
Setting the slave unit. (Page
1
15)
Setting flash mode to <M>.
2
● Press < MODE > button so
that < M > is displayed.
● Set the manual flash output.
(Page 13)
7
、
Multi: Wireless Flash Shooting with Manual Flash
Setting < MULTI > stroboscopic flash.
● Press <MODE> button so that
<MULTI> is displayed.
● Setting the stroboscopic flash.
(Page 14)
The firing frequency of stroboscopic flash during the optic transmission wireless shooting can be set from 1Hz to
199Hz.
Wireless Flash: Optic Transmission
Setting <M> Flash Mode