4.0 CONFIGURATION MENU
4-28
Cheetah Xi Programming Manual
Rev 1, 09/2013
P/N: 06-651
4.4.1.2
HOW TO SET THE PERIPHERAL BUS COMMAND SOURCE
The “Peripheral Bus Command Source” screen is used to direct the communication path for configuration of
peripheral devices connected to the panel.
From the “Peripheral Menu” screen, press the F2 key to access the “Peripheral Bus Source” screen, as
shown below:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
P
E
R I P H E R A L
B U S
B
C O M M A N D
S O U R C E :
C
P A N E L
D
Exhibit 4-44: Peripheral Source Screen
•
Row C - Use the +/- keys to toggle field value from Panel to USB Connector.
PANEL
mode is set by default and allows the panel to communicate with peripheral devices
connected to the Cheetah Xi panel’s RS485 bus. In this mode, peripheral device configuration is
transmitted during the panel configuration process via the panel’s P5 Peripherals jack. You will be
prompted by the C-Linx software to move the programming cable from the P3 Computer jack to the
P5 Peripherals jack to transmit the device configurations.
USB CONNECTOR
mode is used for Cheetah Xi 50 peripheral device configuration. In this mode,
peripheral device configurations are transmitted during the panel configuration process via the
panel’s P3 PC/USB jack. You must keep the cable in the USB port, enter the Level 3 password at
the panel and go to this menu to re-direct the configuration information out the peripheral bus.
L
Note:
After a system reset, the peripheral source will return to the default
PANEL
mode.
4.4.1.3
HOW TO SET THE PERIPHERAL BUS SPEED
The “Peripheral Bus Speed” screen is used to set the communication speed used by all peripheral devices
connected to the panel.
From the “Peripheral Menu” screen, press the F3 key to access the “Peripheral Bus Speed” screen, as shown
below:
1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0
A
B
P E R I P H E R A L
B U S
S P E E D
C
9 6 0 0 B P S
D
Exhibit 4-45: Peripheral Bus Speed Screen
•
Row C - Use the +/- keys to toggle field value from
9600 bps
(factory default) to
38400 bps
.
I
CAUTION
All devices connected to the peripheral bus must be capable of
supporting the higher 38400 bps communication speed if the
setting is to be used. Otherwise, 9600 bps must be used.
Summary of Contents for 10-068
Page 111: ......
