Series ATP Reciprocating Drive - Dual or Single Head
With Adjustable Stroke Length
Operating Manual
CP-MAN-PRD-ATP REV00 EFF. DATE 04/01/19
Page 8 of 12
3.1.2
Install plunger, snap ring, and screw assembly.
•
Loosen the clamp screw approximately ½-turn.
•
Screw the adjusting nut into the retainer assembly.
NOTE:
The adjusting nut screwed in until it bottoms out on the end plate is full-stroke.
FIGURE 6: PLUNGER, SNAP RING, AND SCREW ASSEMBLY INSTALLATION
