Series ATP Reciprocating Drive - Dual or Single Head
With Adjustable Stroke Length
Operating Manual
CP-MAN-PRD-ATP REV00 EFF. DATE 04/01/19
Page 7 of 12
3.1
Adding an Injection Head.
The base model Series ATP comes with a single head but can be easily converted to a double-headed
configuration. You will need the following assemblies:
Figure 3: Head Assembly - Typical
Figure 4: Retainer Assembly
–
All Models
3.1.1
Install the retainer assembly (clamp screw towards the front cover) to the carriage assembly using (2) attach
screws.
FIGURE 5: RETAINER ASSEMBLY AND CARRIAGE ASSEMBLY INSTALLATION
*Motor and Base Removed for Clarity
