MP-KBD
MIDI Interface for Mono / Poly Keyboard
Model 8-433 ver. 1.0
Copyright © 2008 CHD Elektroservis
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
8
Obr. 4-1
b) Plug the flat 6-pin connector of newly installed cable bunch
to the interface board (pic. 4-2). The connector can not be
connected wrong way, there are locks on it.
c) Plug the interface board onto the CN22 connector on
instrument’s KLM-356 board, the flat connector of the interface
leading left (pic. 4-3). Component side of the interface board is
orientated down.
d) Plug the connector of the cable bunch from the
instrument’s keyboard in the plug on the interface board (pic. 4-4).
Be careful, the lock of the connector must lead right.
Pic. 4-2
Pic . 4-3
Pic. 4-4
2.5. INSTRUMENT RE-ASSEMBLY
a) Turn over the front panel of the instrument.
b) Screw the panel with four screws to the sides of the instrument (pic. 5-1) and three screws to
the bottom of the cover (pic. 5-2). Reversed procedure as described in the chapter 2.1.
Pic. 5-1
Pic. 5-2
The installation of the MIDI kit is now finished, the instrument is ready for use with MIDI.
Please read the user’s guide carefully before the MIDI interface use.
