JU6-KBD
MIDI Interface for Juno-6 Keyboard
Model 8-429 ver. 1.0
Copyright © 2010 CHD Elektroservis.
All rights reserved. No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
10
2.4. INTERFACE BOARD INSTALLATION
a) Detach cables lead from instrument’s keyboard by cutting of plastic stripe on the instrument’s
floor plate (pic. 2.4-1).
b) Disconnect cables lead from instrument’s keyboard from connectors “1~8“ and “9~16“ on
instrument’s main board (pic. 2.4-2).
c) Plug the interface to free connectors “1~8“ and “9~16“ on instrument’s main board to that the
interface board directs to right (pic. 2.4-3).
d) Insert plastic spacing tube (part of delivery) between interface’s board and instrument’s floor
plate. Fix interface’s board with help of wood screw (part of delivery) to instrument’s floor plate as
shown on pic. 2.4-4.
Pic. 2.4-1
Pic. 2.4-2
Pic. 2.4-3
Pic. 2.4-4
e) Plug the flat 6-pin connector of newly installed bunched cables (from +5V, GND, CLK and
MIDI-IN socket) to the flat connector on the MIDI-In interface board (pic. 2.4-5). The connector is
shaped such that it cannot be connected the wrong way - there are locks on it.
f) Plug the connectors of the bunched cables from the keyboard onto the plugs on the interface’s
board (pic. 2.4-6). The connectors cannot be connected the wrong way (there are locks on them) but
be careful so they would not be exchanged!
