Chauvin Arnox Statop 4849, User Manual

Page: 30 / 64

30
3.4 Description of parameters
PARA-
Description Adjustment Range Lt settings
METER
SP Setpoint of control LLit...HLit
P (%) Manual mode (%) 0...100%
ASP1 Alarm setpoint
If ALm1 = 0, 1, 4 or 5 :
alarm setpoint value
LLit...HLit 200°C
If ALm1 = 2, 3, 6, 7, 8, 9, 10 or
11 : bandwidth
If ALm1 = 12 or 13 : timer
0...3600 minutes
rr Ramp rate for the process value If 0
≤
in
≤
9 : 0...200 °C/min.
If in = 10 : 0...3600 unit/min. 0°C/minute
oFSt Offset value for manual reset 0...100% (« ti » =0) 20.0%
SHiF Offset shift for process value -111°...111°C 0°C
Pb Proportional band 0...200°C 10°C
0% (ON-OFF mode)
ti Integral time 0...3600 s 120 s
td Derivative time 0...1000 s 30 s
LoCL Local mode 0 : no control parameters can be changed
1 : control parameters can be changed
1
SEL Parameters selection 0 : none 0
(allows selection of additional 1 : ASP1
parameters to be accessible 2 : rr
at Level 0 security, i.e. without 3 : oFSt
having to press key for 6 s). 4 : ASP1, rr
5 : ASP1, oFSt
6 : rr, oFSt
7 : ASP1, rr, oFSt
Ct Proportional cycle time 0...120 s Relay output : 20 s
Analogue output : 0 s
Pulsed voltage : 1s
In Input mode selection 0 : thermocouple J 0
1 : thermocouple K
2 : thermocouple T
3 : thermocouple E
4 : thermocouple B
5 : thermocouple R
6 : thermocouple S
7 : thermocouple N
8 : Pt 100
Ω
(DIN 43.760)
9 : Pt 100
Ω
(JIS C1604-1981)
10 : linear voltage -10...60 mV DC
ALm1 Alarm mode selection 0 : process high alarm
Process alarms are at fixed 1 : process low alarm 1
temperature points. Deviation 2 : deviation high alarm
alarms move with the setpoint 3 : deviation low alarm
value. 4 : inhibit process high alarm
5 : inhibit process low alarm
6 : inhibit deviation high alarm
7 : inhibit deviation low alarm
8 : outband alarm
9 : inband alarm
10 : inhibit outband alarm
11 : inhibit inband alarm
12 : alarm relay On as Dwell Time output
13 : alarm relay Off as Dwell time output