98
4-14 SELECCIÓN MANUAL DE GAMA - RANGE
El modo manual está activo para las funciones A, V y
Ω
.
Al ponerse en marcha, la selección de gama está en modo automático.
- Con una pulsación sobre el botón RANGE se selecciona el modo manual :
se visualiza RANGE.
- Mediante pulsaciones sucesivas, se selecciona la primera, segunda,..., o quinta
gama de medición.
- Una pulsación mantenida restituye la pinza al modo automático.
Modo auto
→
RANGE (2s)
→
Modo auto
Nota :
Para la función Hz, el botón RANGE selecciona los umbrales de
sensibilidad en tensión : 10 mV, 100 mV ó 1 V.
4-15 VALOR MÍN O MÁX - MIN/MAX
Esta función está activa para A, V,
Ω
, Hz, , ADP,
Esta función effacer pone la pinza en funcionamiento permanente y en modo
manual, sobre la gama en relación con la señal presente : se visualiza RANGE.
Lo más indicado seria quizás ser preseleccionar la gama de medición.
Esta función mantiene el valor mín o máx : se visualiza igualmente HOLD.
Este valor mantenido se reactualiza si la señal toma un valor superior en modo MAX,
o inferior en modo MIN.
- Una pulsación en el botón MIN/MAX y se visualiza MIN : visualización del valor mín.
- Una segunda pulsación hace que aparezca en pantalla MAX : se visualiza el
valor máx.
- Una tercera pulsación : retorno al modo manual.
Modo automático
→
MIN MAX
→
Modo manual
Nota
: - El paso de MIN a MAX borra el valor mín, mientras que el paso de MAX
a modo manual borra el valor máx. Estos valores no quedan en memoria.
- En esta función, el paso, a mantenimiento de la pantalla (pulsación de
HOLD) viene únicamente señalado por un bip sonoro, con el símbolo
HOLD ya visualizado.