53
4.5 BATTERIEKONTROLLE
Die Betriebsdauer mit einer 9V-Alkali-Blockbatterie beträgt etwa 80 Stunden.
Die Vielfachmeßzange prüft während des Betriebs laufend den Batteriezustand.
Sinkt die Batteriespannung unter 7,2 V erscheint das Batterie-Symbol in der
Anzeige; die Batterie ist zu ersetzen.
4.6 AC-/DC-STROMMESSUNG “A”
■
■
■
■
■
AC-Messungen
(Wechselstrom) : Stellen Sie den Drehschalter auf “A”,
Betriebsart AC ( ) ist automatisch eingestellt. Der Meßwert erscheint in
A RMS.
■
■
■
■
■
DC-Messungen
(Gleichstrom) : Stellen Sie den Drehschalter auf “A” und
drücken Sie anschließend Taste
um Betriebsart DC (
) einzustellen.
Der Meßwert erscheint in A
■
■
■
■
■
Drücken Sie auf die Taste zur Öffnung der Zangenbacken und umschließen
Sie nur einen Leiter.
■
■
■
■
■
Schalten Sie nach Bedarf eine der Zweitfunktionen MIN, MAX, HOLD oder
RANGE ein.
Hinweis: Nulleinstellung in Funktion A
Falls im DC-Betrieb (
) vor einer Messung in der Anzeige nicht der Wert
“Null” erscheint, muß ein Nullabgleich der Meßzange vorgenommen
werden. Dazu wird einfach die Taste DC ZERO gedrückt. Der Nullabgleich
kann bis zu ± 10 A ausgleichen.
4.7 AC-/DC-SPANNUNGSMESSUNG “V”
■
■
■
■
■
AC-Messungen
(Wechselspannung) : Stellen Sie den Drehschalter auf “V”,
Betriebsart AC ( ) ist automatisch eingestellt. Der Meßwert erscheint in
V RMS.
■
■
■
■
■
DC-Messungen
(Gleichspannung) : Stellen Sie den Drehschalter auf “V”
und drücken Sie anschließend Taste
um Betriebsart DC (
) einzustellen.
Der Meßwert erscheint in V
■
■
■
■
■
Stecken Sie das rote Meßkabel in die + Buchse und das schwarze
Meßkabel in die COM-Buchse. Schließen Sie die Vielfachmeßzange
parallel an die zu messende Spannung an.
■
■
■
■
■
Schalten Sie nach Bedarf eine der Zweitfunktionen MIN, MAX, HOLD oder
RANGE ein.
~
~