5. Appendix
8
5/7/2010 1:21 PM
Orientation
This fixture may be mounted on the included tripod stand, in any location, provided there is adequate
room for ventilation.
Rigging
There are two methods of mounting this fixture.
Using the included tripod stand
Using a clamp on the two clamp hanging bolts
Adjust the angle of the each of the four lights on the fixture by loosening both knobs and tilting the
fixture. After finding the desired position, retighten both knobs.
o
When selecting installation location, take into consideration access and routine
maintenance.
o
Never mount in places where the fixture will be exposed to rain, high humidity,
extreme temperature changes or restricted ventilation.
o
The clamps for hanging are sold separately.
o
When using the clamp hanging bolts, BOTH of the two hanging positions MUST be
used.
Clamp hanging bolts
(2) two total
Light pan angle
adjustment knob
Light tilt angle
adjustment knob
Both clamps MUST be USED
when truss-mounting!
