Page 8 of 17
Setup
WELL Gobo User Manual Rev. 1
DMX Linking
You can link the WELL Gobo to a DMX controller using a wireless DMX connection. If using other DMX-
compatible products with this product, each can be controled individually with a single DMX controller.
DMX Personalities
The WELL Gobo uses a wireless DMX data connection for the
1Ch
,
2Ch
,
3Ch
, and
6Ch
DMX personalities.
•
Refer to the
chapter for a brief description of each DMX personality.
•
Refer to the
chapter to learn how to configure the WELL Gobo to work in these personalities.
•
The
section provides detailed information regarding the control
personalities.
Master/Slave Connectivity
The Master/Slave mode allows a WELL Gobo (the master) to control one or more WELL Gobo products (the
slaves) without a DMX controller. One WELL Gobo becomes the master when running an auto program or by
being in Static mode.
You must configure each slave’s control panel to operate in Slave mode. During Master/Slave operation,
the slaves will operate in unison with the master.
For more information about DMX standards, Master/Slave connectivity, or the DMX cables
needed to link this product to a DMX controller, download the DMX Primer from the
Chauvet website:
.
DO NOT connect a DMX controller to products operating in Master/Slave mode. The DMX
controller signals may interfere with the signals from the master.
• The
section of this manual provides detailed instructions on how to
configure the master and slaves.
• For more information about DMX standards or the DMX cables needed to link this
product to a DMX controller, download the DMX Primer from the Chauvet website:
Summary of Contents for WELL GOBO
Page 1: ...USER MANUAL ...