Vue™ 1.1 User Manual
7
Rev. 4
4.
O
PERATING
I
NSTRUCTIONS
Standalone Mode (Sound-Active, Auto Mode):
This mode allows a single unit to run to the beat of the music, or the unit will auto change in Auto Mode.
1)
Set dipswitches position, as desired:
Dipswitches
Function
1
Speed of effect 1
2
Speed of effect 2
3
Speed of effect 3
4
Speed of effect 4
5
Strobing speed 1
6
Strobing speed 2
7
Strobing speed 3
8
All On
9
Sound standalone mode
10
Auto standalone mode
Note: The Speed of effect and strobing effect DIP switches affect the auto programs. The
strobing dipswitches work on their own when all other dipswitches are turned off and there is
no dmx signal present. Also, when you combine the dipswitches for the speed and/or strobe,
they stack together for greater speeds.
2)
The unit will react to the low frequencies of music via the internal microphone in Sound Active mode,
or the unit will auto change in Auto Mode.
3)
Use the audio sensitivity knob on the back of the unit to make the unit more or less sensitive in
Sound-Active mode. Turning the knob counterclockwise decreases the sensitivity; turning the knob
clockwise increases the sensitivity.
This fixture will automatically recognize master slave operation when connected properly. The first fixture
will be set as the master, and all fixtures following this will set as slave fixtures. You must follow daisy-chain
configuration for this type of setup.
Note: Do not connect a DMX controller to the fixture(s) when you are trying to run them
standalone, as this will put them in DMX mode automatically.
DMX Mode
This mode allows the unit to be controlled by any universal DMX controller. This fixture will automatically
switch to DMX mode when you connect a DMX controller to it. Plug the DMX controller into the fixture.
Using the DIP switches on the back of the fixture, set the DMX starting address.
DMX Channel Values
C
HANNEL
V
ALUE
F
UNCTION
1
000
ó
024
025
ó
049
050
ó
074
075
ó
099
100
ó
124
125
ó
149
150
ó
174
175
ó
199
200
ó
224
225
ó
249
250
ó
255
Control/Operating Mode
Red, Green, Blue mode
Standalone mode 1 (automatic)
Standalone mode 2 (automatic)
Standalone mode 3 (automatic)
Standalone mode 4 (automatic)
Standalone mode 5 (automatic)
Standalone mode 6 (automatic)
Standalone mode 7 (automatic)
Standalone mode 8 (automatic)
Standalone mode 9 (automatic)
Standalone (sound active)
2
000
ó
255
Red
0%
ó
100%
3
000
ó
255
Green
0%
ó
100%
4
000
ó
255
Blue
0%
ó
100%
5
000
ó
255
Standalone Speed (Mode 1-9)
(Slow
ó
Fast)
000
ó
009
010
ó
255
Strobing Speed (Red Green Blue Mode)
(No Strobe)
(Slow
ó
Fast)
6
000
ó
255
Dimmer
0%
ó
100%
