Chauvet Vne 1.1, User Manual

Page: 10 / 12

Vue™ 1.1 User Manual 10 Rev. 4
General Troubleshooting
Symptom Solution(s)
Applies to
Lights
Foggers
& Snow Controllers
Dimmers
& Chaser
Auto shut off Check fan thermal switch reset
ü
Beam is very dim or
not bright Clean optical system or replace lamp
Check 220/110v switch for proper setting
ü
Breaker/Fuse keeps
blowing Check total load placed on device
ü
Chase is too slow Check users manual for speed adjustment
ü ü ü
Device has no power Check for power on Mains.
Check device’s fuse. (internal and/or external)
ü ü ü
Fixture is not
responding Check DMX Dip switch settings for correct addressing
Check DMX cables
Check polarity switch settings
ü
Fixture is on but
there is no
movement to the
audio Make sure you have the correct audio mode on the
control switches. If audio provided via ¼” jack, make
sure a live audio signal exists
Adjust sound sensitivity knob
ü ü ü
Loss of signal Use only DMX cables
Install terminator
Note: Keep DMX cables separated from power cables
or black lights.
ü ü ü ü
If you still have a problem after trying these solutions, contact CHAUVET® Technical Support.