background image

 
1. Before You Begin 

Rev. 2 

Safety Instructions 

 

 

Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that 
they also receive this instruction booklet. 

 

Always make sure that you are connecting to the proper voltage, and that the line voltage you are 
connecting to is not higher than that stated on the decal or rear panel of the fixture. 

 

This product is intended for indoor use only! To prevent risk of fire or shock, do not expose fixture to 
rain or moisture. 

 

Make sure there are no flammable materials close to the unit while operating. 

 

The unit must be installed in a location with adequate ventilation, at least 20 in (50 cm) from adjacent 
surfaces. Be sure that no ventilation slots are blocked. 

 

Always disconnect from power source before servicing or replacing fuse and be sure to replace with 
same fuse source. 

 

Secure fixture to fastening device using a safety chain. 

 

Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate fixture at temperatures higher 
than this.  

 

In the event of a serious operating problem, stop using the unit immediately. Never try to repair the 
unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please 
contact the nearest authorized technical assistance center. 

 

Never connect the device to a dimmer pack. 

 

Make sure the power cord is never crimped or damaged. 

 

Never disconnect the power cord by pulling or tugging on the cord. 

 

Never carry the fixture directly from the cord. Always use the hanging/mounting bracket. 

 

Avoid direct eye exposure to the light source while it is on.  

 

2.

 

I

NTRODUCTION

 

Features 

 

3-channel DMX-512 LED centerpiece  

 

Individual control of red, green and blue 

 

Variable electronic strobe in any color combination 

 

Back-and-forth motor effect with variable speed  

 

Static colors with or without DMX controller 

A d d i t i o n a l   F e a t u r e s  

 

Built-in automated programs  

 

Built-in sound activated programs  

 

Tri-color LEDs (2,550 mA total) 

 

Additional power output: max 26 units 

 
 
 

 

 

 

Please read these instructions carefully. It includes important 
information about the installation, usage and maintenance of this 
product. 

Summary of Contents for TRIDENT













Reviews: