O P E R A T I N G I N S T R U C T I O N S
TFX-24C Users Manual Version 2.02
15
STEP
INSERT
Insert a Step or Steps
1 .
2 .
3 .
4 .
Record a scene or scenes
you wish to insert.
Be sure you’re in and
CHASE
SCENE Enter
the Edit mode.
Tap the Step button to scroll
to the step which you wish
to insert before. You may
read the step from the
Segment Display.
Tap the Insert button to
insert the step you’ve created
before, all LEDs will flash,
indicating the step is
inserted.
Exit Edit mode.
Example:
EXAMPLE: Insert a step with
channels 1-12 fully on at a
time between step 4 and 5 of
program 35.
1.
Record enable.
2.
Push Channel sliders 1-12 to the top and record the scene as a step.
3.
Tap the Mode Select button to select CHNS
SCENE mode.
4.
Tap the Page button until Page 2 LED lights.
5.
Tap the Flash button 35 while holding down the Edit button, the corresponding scene
LED lights.
6.
Tap the Step button to scroll to the step 4.
7.
Tap the Insert button to insert the scene you’ve created before.
Modify a Step or Steps
1 .
2 .
3 .
4 .
Enter Edit mode.
Tap the Step button to scroll
to the step you wish to
modify.
Press and hold the Up
button if you want to raise
the intensity. If you want to
lower the intensity, press and
hold down the Down
button.
While holding down the Up
or Down button, tap the
Flash button corresponding
to the DMX channel of the
scene you wish to modify
until you reach the desired
intensity value read from the
Segment Display. Then you
may tap the Flash buttons
until you are satisfied with
the new scene.
Repeat steps 1, 2 and 3 until
all the steps have been
modified.
Exit Edit mode.
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
10
8
6
4
2
0
3
4
5
27
28
29
UP
FLASH 13-24
STEP
UP
DOWN
