SparkleDrape™ LED QRG
Page 4 of 8
AC Power
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Fuse
Replacement
1.
Disconnect this product/product from the power outlet.
2.
Wedge the tip of a flat head screwdriver into the slot of the fuse holder
and pry the safety cap out of its housing. It will pull the installed fuse
with it.
3.
Remove the blown fuse from its safety cap and replace it with a fuse of
the exact same type and rating (F 2 A, 250 V).
4.
Insert the fuse holder back in its place, and reconnect power.
DMX Linking
The SparkleDrape™ LED can work with a DMX controller when linked
using a regular DMX serial connection.
If you are not familiar with the DMX standard, please download the
DMX
Primer
document from www.chauvetlighting.com.
DMX
Connection
The SparkleDrape™ LED uses a regular DMX data connection for its 8-
channel personality.
Download the SparkleDrape™ LED User Manual and refer to the
Setup
chapter to learn how to connect this product for DMX operation, and the
Operation
chapter to learn in detail how to configure this product for DMX
operation.
Summary of Contents for SparkleDrape LED
Page 1: ...Quick Reference Guide ...