Appendix
Universal DMX Control (DMX Mode):
This mode allows you to use a universal DMX-512 controller to control lasers operation and effects.
1)
To control your fixture in DMX Mode use standard XLR DMX cables to daisy chain your units
together via the XLR connector on the rear of the units. For long cable runs we suggest a
terminator on the last fixture.
Mode Dipswitches
DMX mode
10 = On, 11 = Off, 12 = On
2)
Assign a DMX address to the unit by following the dipswitch chart.
3)
Use DMX controller to control your units.
OUT
IN
POWER
1: DMX
2: DMX
N: DMX
DMX-512
Note!
System doesn’t use DMX controller in Master-Slave Mode.
System may not set to two Master units in Master-Slave Mode.
LG-60 User Manual
12
11/14/2007 6:04:00 PM
