Rogue™ RH1 Hybrid QRG
EN
4
DMX Linking
The Rogue™ RH1 Hybrid will work with a DMX controller using a 3- or 5-pin
DMX serial connection. A DMX Primer is available from
www.chauvetprofessional.com
.
DMX Connection
The Rogue™ RH1 Hybrid uses a 3- or 5-pin DMX data connection for its DMX
personalities:
20CH
and
25CH
. See the User Manual for information about
connecting and configuring the product for DMX operation.
Mounting
Before mounting this product, read the
Safety Notes
. Use at least one mounting
point per product. Make sure the mounting clamps are capable of supporting the
weight of the product. For our Chauvet line of mounting clamps, go to
www.trusst.com/productcategory/accessories-clamps/
.
Product
Mounting
Diagram
Control Panel
Description
Button
Function
<MENU>
Exits from the current menu or function
<ENTER>
Enables the currently displayed menu or sets the currently
selected value into the selected function
<UP>
Navigates upwards through the menu list or increases the
numeric value when in a function
<DOWN>
Navigates downwards through the menu list or decreases
the numeric value when in a function
Overhead Mounting
Floor Mounting
Mounting Clamp
Safety Cable
Omega Bracket