Setup
-12-
Rogue R2X Spot User Manual Rev. 2
Mounting
Before mounting this product, read and follow the
. For our Chauvet line of
mounting clamps, go to
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•
Make sure to mount this product away from any flammable material as indicated in the
•
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•
If hanging this product, make sure that the mounting location can support the product’s
weight. See the
for the weight-bearing requirements of this
product.
•
When hanging this product, always secure to a fastening device using a safety cable (such
as
CH-05
from Chauvet).
Procedure
The Rogue R2X Spot comes with a preinstalled mounting surface to which you will be able to
attach the 2 included omega brackets. Make sure the clamps (such as
CLP-15
from Chauvet)
are capable of supporting the weight of this product. Use two mounting points per product. In
addition, use a safety cable to link the product to the structure.
Mounting Diagram
Floor Mounting
Overhead Mounting
Omega Brackets
Safety Cable
Mounting Clamp
Mounting
Surface