Setup
-8-
Ovation™ H-105WW User Manual Rev. 1
Mounting
Before mounting this product, read and follow the
Safety Notes
. For our CHAUVET®
Professional line of mounting clamps, go to
http://trusst.com/products/
.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Rigging
Chauvet recommends using the following general guidelines when mounting this product.
•
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes
.
•
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•
If hanging this product, make sure that the mounting location can support the product’s
weight. See the
Technical Specifications
for the weight-bearing requirements of this
product.
•
When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET® Professional line of safety cables, go to
http://trusst.com/products/
.
Procedure
The Ovation™ H-105WW comes with a yoke to which you can attach a mounting clamp for
hanging or you may attach a cable to the safety loop located directly center of the back panel
for pendent mounting. You must supply your own mounting clamp or cable. Make sure the
clamps are capable of supporting the weight of this product. Use at least one mounting point per
product. For our Chauvet line of mounting clamps, go to
http://trusst.com/products/
.
Mounting Diagram
Pendent Mounting
Overhead Mounting
Safety Loop
Mounting
Clamp
Safety Cable
Summary of Contents for Ovation H-105WW
Page 1: ...User Manual ...
