Installation / Mounting
This unit has been designed to be hung. It is recommended that, for safety purposes, your lighting effect be properly mounted
using a suitable hanging clamp and safety cable. CHAUVET offers a range of items, which are ideal for safe mounting.
Use in a well-ventilated area without obstruction to the vents or fan.
Replacing Fuses
If the unit does not function at all when connected to the main power supply i.e. does not illuminate after replacing the lamp.
Then it is highly likely that the fuse has blown.
Disconnect from main power supply before attempting to replace either lamps or fuse.
In order to replace the fuse, disconnect from the main power supply first, and then pry up the fuse holder cover to reveal the
fuse. The unit has a label attached which indicates the correct fuse rating and you will also find this listed as part of the specifi-
cations for the unit later in this guide. It is most important that replacement fuses are of the correct rating. Failure to use the
correct fuse could damage the lighting effect beyond economic repair.
The fuse should simply be placed inside the holder and the fuse holder replaced. When this is done, connect to the main power
supply to check. If the unit is still not working then please contact CHAUVET for servicing.
Specifications
Voltage:
AC 110V 50/60Hz or 240V 50Hz
Fuse:
110V: 7A 250V
240V: 5A 250V
Lamp:
ELC3 24V 250W
Weight:
22 lbs / 9.8 kgs
Dimensions:
18.75” x 8” x 6” / 476mm x 203 mm x 152 mm
