Lamp
ELC3 24V 250W (300 Hrs)
• Always switch off the main power supply and never handle the lamp or luminaire
when it is hot.
• Never touch the bulb with bare hands. Oils on your skin may greatly reduce the life
of the bulb.
• To insert a new lamp, remove the 4 screws on the side of the lamp cover. Insert
the new lamp into the socket and place into the lamp holder. Replace the 4 screws.
• Always use the type of lamp specified.
DMX Operation
Before connecting this unit to the main power supply for the first time you must first install the lamp. (See 'Replacing Lamps' for
details).
This lighting effect has been designed to function on a main power supply of 120V, 60Hz or 230V, 50Hz and has been fitted with
a suitable power plug.
The Omega II (DMX-255) is a DMX fixture that can be operated with CHAUVET's DMX-6, DMX-40, DMX-50, ShowXpress or
any other universal DMX controller. The unit will also work in stand alone mode sound activated. To operate in DMX mode, you
must link the units together using a premium quality 3-pin DMX cable in the following configuration. 'Out' from the first unit to 'In'
on the second, 'Out' from the second to 'In' on the third and so on.
The Omega II (DMX-255) is a 5 channel DMX fixture. Please consult the controller manual to determine the proper address for
the units.
Example: To set the address at 12
1.Set SW 10 to OFF.
2. Count the value of the switches in the on position.
and SW 4 equals 8.
3. Set SW 3 and SW 4 to the ON position. (4 + 8 = 12)
1
2
3
4
5
6
7
8
9
Off
On
Value
1
2
4
8
16
32
64
128
256
•Screws
