Introduction
Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy many trouble
free hours with this unit. To assist with the care and use of the product we have prepared this short guide.
General Instructions
Please read the enclosed instructions carefully as they include important points about safety for usage, installation and
maintenance of this unit.
• Please keep this booklet for future consultation. If you sell this unit to another user, be sure that the new user also receives this
manual so that they have the necessary information about the use and maintenance of the unit,
• Before the initial start-up, please unpack and carefully check all components in case any damage may have occurred during
shipment.
• Locate a suitable location for installation where there is good ventilation. Make certain that the fan or vents are not blocked.
• Protect our enviroment! Please dispose of packacking material properly.
• The electrical work that may be necessary for installation must be done by qualified personnel.
• Always remember to unplug the unit from the main power before any service is done.
Do not open the unit other than to replace the lamp. There are no serviceable parts inside.
• It is very important to ground the yellow / green conductor to earth in order to meet regulations for safety.
• Check the surrounding area and make sure that there are no flammable liquids, water or metal objects that could enter the fix-
ture. If a foreign object enters the unit, immediately disconnect the main power. Also, place the fixture in a well-ventillated spot at
about 15 cm from the walls.
• Do not touch any wires during operation, as high voltage is hazardous.
• In the event of serious operating problems, stop using the unit immediately. Never try to repair the unit yourself. Repairs carried
out by unqualified personnel can lead to damage and will void the warranty. Please contact CHAUVET Technical Assistance.
Always use genuine spare parts.
Main Features
• Voltage: AC Switchable 120V, 60Hz / 230V, 50Hz
• Bulb: ELC3 24V 250W
• Beam Angle: 8.8o
• DMX-512 control, 5 DMX channels
• 11 Indexable Colors plus white
• 14 Indexable Gobos plus open
• Pan: 180
o
• Tilt: 84
o
• Master / Slave mode
• Sound Activated
Top
• Sound Sensitivity
• Power LED
• DMX Signal LED
• Microphone
• CH-X Jack
• DMX In
• DMX Out
• Power Socket
• Fuse Holder
• 110/220V Selector
