Setup
-6-
NEXT NXT-1 User Manual Rev. 8
Mounting
Before mounting this product, read and follow the Safety Notes. For our CHAUVET
Professional line of mounting clamps, go to http://trusst.com/products/.
Orientation
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance. The NEXT NXT-1 can be suspended upright or
upside down using the 2 Omega brackets included, or it can be placed on its rubber feet on a
flat level surface.
Chauvet recommends using the following general guidelines when mounting this product:
•
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
•
The product is not intended for permanent installation.
•
Make sure to mount this product away from any flammable material as indicated in the
Safety Notes.
•
Never mount in places where rain, high humidity, extreme temperature changes, or
restricted ventilation may affect the product.
•
If hanging this product, make sure that the mounting location can support the product’s
weight. See the Technical Specifications for the weight-bearing requirements of this
product.
•
When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
•
When mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
•
Place the NEXT NXT-1 so that it can move freely without hitting anything or anybody.
•
Leave enough slack on the cables to prevent tension and pull on the plugs.
Mounting Diagram
Safety
Cable
Overhead Mounting
Floor Mounting
Rubber Feet (x4)
Mounting Clamps
Omega Brackets