Function Selection
The LGG3000X will operate in stand alone as well as DMX mode. In stand alone mode, the user has the option of beat
activation or automatic. To access these functions, the DIP switches are utilized as per the chart below.
Installation / Mounting
Although this unit can be used in an upright position, it is recommended that, for safety purposes, your lighting effect be
properly mounted using a suitable hanging clamp and safety cable. CHAUVET offers a range of items, which are ideal for safe
mounting.
Use in a well-ventilated area without obstruction to air vents
.
Unit should be mounted in such a manner that the emitted beam will not strike people.
Replacing Fuses
If the unit does not function at all when connected to the main power supply i.e. the mechanism does not spin. Then it is highly
likely that the fuse has blown.
Disconnect from main power supply before attempting to replace either lamps or fuse.
In order to replace the fuse, disconnect from the main power supply first, and then unscrew the fuseholder cover to reveal the
fuse. The unit has a label attached which indicates the correct fuse rating and you will also find this listed as part of the
specifications for the unit later in this guide. It is most important that replacement fuses are of the correct rating. Failure to use
the correct fuse could damage the lighting effect beyond economic repair.
The fuse should simply be placed inside the holder and the screw cap replaced, when this is done connect to the main power
supply to check. If the unit is still not working then please contact your dealer or
CHAUVET for servicing.
Function
1
2
3
4
5
6
7
8
9
10
Auto Mode
Off
Off
Off
Off
Off
Off
On
Run All Patterns
Auto Mode
Off
On
On
Run One Pattern
Sound
On
X
X
X
X
On
On
On
X
On
Activated
Off
Off
Off
Off
Off
Off
Off
Off
Off
Off
Slave Mode
Off
Off
DMX Mode
DIP Switches
Select Pattern
Select Mirror
Rotation
Select Mirror
Rotation
Set Start Address
