At the Front:
Laser Aperture
Mounting Bracket
1 2
3 4
5
Fig 1
Introduction
Congratulations on the purchase of your new CHAUVET lighting effect. We are confident you will enjoy
many trouble free hours with this unit .To assist with the care and use of the product we have prepared
this short guide.
Operation
This lighting effect has been designed to function on a DC power supply of 9V and has been supplied
with a suitable power pack for use with your local voltage. Check the label on the unit and the power plug
for the correct voltage.
When connected to the mains power supply via the power pack and switched on the unit should
illuminate and shoot a 4.9mW single laser (either green or red).
Warning: Do not aim towards eye.
This unit provides three modes of operation accessible via the functions switch (Fig 1). The three modes
are as follows: Sound Activation, Auto Mode and Manual. In the sound and automatic modes, the laser
will change through sixteen preset patterns. In manual mode, the user can select the pattern and rotation
speed.
Great with fog.
Installation / Mounting
This unit has been designed to be hung. It is recommended that, for safety purposes, your lighting effect
be properly mounted using a suitable hanging clamp and safety cable. CHAUVET offers a range of items,
which are ideal for safe mounting.
Unit should be mounted in such a manner that the emitted beam will no strike people.
Cleaning
The most important part your lighting effect to keep clean is the glass front as this allows the laser output
to transmit. This should be cleaned with a soft damp cloth. The housing of the unit may also be cleaned
in the same way. Internal cleaning must be carried out by a fully qualified technician.
Maintenance & Servicing
At the Rear:
1. Power Input
2. Power Switch
3. Audio Sensitivity Adjustment
4. Mode Switch (Audio/Auto/Manual)
5. Manual Pattern Selection
There is no maintenance required. Work on internal parts should be carried out by a qualified technician.
Removal of any covers is considered a breach of warranty and will not be covered under any such
agreement unless authorized first by the company.
Troubleshooting
y
If the unit is not functional – check that the main power supply is ‘on’ and DC jack is secure.
y
If the unit is not functional – make sure if in audio mode there is music playing.
y
If after trying this solution you still have a problem, contact your dealer or CHAUVET.
Contact CHAUVET
USA
Technical Assistance: 1-800-762-1084 (954) 929-1115
E-Mail [email protected]
Caution
No user serviceable parts, please refer to CHAUVET for service.
Unit should be mounted in such a manner that the emitted beam will no strike people.
Power Connections
The unit is supplied with a power pack appropriate to its voltage and destination. It is imperative that the
correct power pack suitable for this unit be used at all times. If any other type of supply is provide to this
unit then it is likely to render the unit non-operational.
Caution: Use of controls or adjustments or performance of procedures other than as specified herein may
result in hazardous radiation exposure!
Technical Specifications
Model
Green Wizard
Laser Wizard
Power Adapter
DC 9V 800 mA
Laser Diode
Green laser diode
Red laser diode
Wavelength
532 nm
650nm
Dimensions
143 x 188 x 131 mm / 5.63 x 7.4 x 5.16 in
Weight
0.4 kg / 0.88 lbs
User Information
(Please complete for your records)
Data Purchased : / / Serial No. :
Dealer Stamp : Model : LGG-1550G Green Wizard
LGG-1505R Laser Wizard
