Page 5 of 14
EVE E-100Z V3 User Manual Rev. 1
S
ETUP
3. S
ETUP
AC Power
The EVE E-100Z V3 an auto-ranging power supply and it can work with an input voltage range of 100 to
240 VAC, 50/60 Hz. To determine the product’s power requirements (circuit breaker, power outlet, and
wiring), use the current value listed on the label affixed to the product’s back panel, or refer to the product’s
specifications chart. The listed current rating indicates the product’s average current draw under normal
conditions.
Fuse Replacement
Power Linking
The product provides power linking via the Edison outlet located in the back of the product. Please see the
diagram below for further explanation.
Power Linking Diagram
•
Always connect the product to a protected circuit (a circuit breaker or fuse).
Make sure the product has an appropriate electrical ground to avoid the risk of
electrocution or fire.
•
To eliminate unnecessary wear and improve its lifespan, during periods of non-
use completely disconnect the product from power via breaker or by
unplugging it.
Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if
the rheostat or dimmer channel serves only as a 0 to 100% switch.
1.
Disconnect the product from power.
2.
Using a flat-head screwdriver, loosen the fuse holder and pull straight out.
3.
Remove the blown fuse from the holder.
4.
Replace with a fuse of the exact same type and rating.
5.
Insert the fuse holder back in place and reconnect power.
Disconnect the product from the power outlet before replacing the fuse.
You can power link up to 9 EVE E-100Z V3 products on 120 VAC or up to 16 EVE E-
100Z V3 products on 230 VAC.
1
st
Product
2
nd
Product
3
rd
Product
Additional
Products
Power
Source
Summary of Contents for EVE E-100Z
Page 1: ...User Manual V3...
