background image

X GLOO ®

  .  

Windeckstr. 4

  .  

83250 Marquartstein

  .  

GERMANY

Tel:  +49 (0) 86 41- 69 48 - 60  .  xgloo.com  .  [email protected]

IMPORTANT INFORMATION

•   This user’s manual is intended to familiarize you with the operation 

of the product. Keep this manual in a safe place for future 
reference.

•  The product is not a toy. Keep it out of the reach of children 

and animals.

•  Modifying or altering the product is prohibited!

•  Never open the product by yourself. Never repair the product 

yourself!

•  Handle the product carefully. It can be damaged by shock, bumps, 

or by falling from even modest heights.

•  Keep the product away from extreme heat and direct sunlight.

•  Never submerge the product in water or other liquids. 

• Dimmer Box IP54 protected from low-pressure water jets 

•  Clean the LED light using a damp cloth and dry it well afterward. 

Do not use aggressive cleaning agents.

•  Store the LED light in a dry place.

•  Subject to technical changes and modifi cations!

IMPORTANT INFORMATION FOR DISPOSAL: 

This electrical 

appliance cannot be disposed of with household waste. For 
proper disposal, please contact the public collection points 
in your municipality. Details of the location of collection 
points and of the possible quantity restrictions per day / 
month / year can be acquired through the respective muni-
cipality.

SPECIFICATIONS (AT 100% LIGHT INTENSITY)

Light output: 1800 Lumen    |   Dimming: with dimmer (3)
Energy use: 18 Watt    |    Operating voltage: 42V
Power supply: 100-277V AC    |    LED: 18 Watt Protection Class
Circular connector: IP68    |    Case dimmer box: IP54
Energy-effi  ciency class: A  |  Light temprature: 4000K    
LED light dimensions: 295x295x7 mm |  WEEE-Nr.: DE28075200

Thank you for purchasing this LED Lighting Kit with
high-power LED light and included dimmer function. 
Please read this user’s manual and follow all 
instructions and tips regarding the proper use of your 
new LED Lighting Kit.   

CONTENTS OF DELIVERY

1x -  LED light
1x - dimmer box including 230V power cable
1x - LED lighting mount

INSTALLATION AND USE

1.   Close the connection (2) between the LED light (1) and the dimmer 

box (3) (make sure that the connection is correctly and snugly 
closed by turning the barrel around the connection clockwise).

2.    It is easiest to install the LED Lighting Kit during the setup of your 

Event Tent, just after infl ating 
three of the four Tubes. Take the 
long end of webbing on the LED 
light and loop it over the tube 
intersection (6). Connect it to the 
buckle on the other side of the 
LED light. Tighten the webbing 
so the light is held snugly against 
the Tubes.

3.   Next, extend the four toggles 

on the LED lighting mount and 
connect them to the loops on the 
inside of the Tubes of the Event 
Tent (7).

4.  Tuck the cable underneath the 

Roof so that it follows one Tube 
all the way to the ground (8). The 
fourth Tube can now be infl ated.

5.  The dimmer box (3) can be safely 

stored on the ground.

Stepless adjustment of the LED 
light brightness is possible with 
the dimmer box (3).    

Remove the LED Lighting Kit from 
your Tent using the steps above in 
reverse order. Ensure that the LED 
light does not hit the ground when defl ating your Tent!

6

7

8

LED LIGHTING KIT | MANUAL

LED Panel (1), Connector (2), Dimmer box (3) Power plug (4)

2

1

3

4

1 1,5 m

Reviews: