3
_
-
DMX512 CONFIGURATION
Channel 1
Channel 2
Channel 3
Channel 4
Shutter
Gobos/Colors
Rotation
Zoom
255 Fastest speed
Gobo Shaking
136 Slowest speed
135 Fastest speed
Strobe
016 Slowest speed
000-015 Stop
255 Fastest speed
Rainbow Effect
128 Slowest speed
120-127 Gobo 14 / Yellow
112-119 Gobo 13 / Red
104-111 Gobo 12 / Four-color
096-103 Gobo 11 / Green
088-095 Gobo 10 / Magenta
080-087 Gobo 9 / Yellow
072-079 Gobo 8 / Cyan
064-071 Gobo 7 / Red
056-063 Gobo 6 / Green + Pink
048-055 Gobo 5 / Magenta
040-047 Gobo 4 / Amber
032-039 Gobo 3 / Blue
024-031 Gobo 2 / Orange
016-023 Gobo 1 / Cyan
008-015 Open
000-007 Blackout
246-255 Stop
245
135
121-134 Stop
120
010
000-009 Stop
255 Fastest speed
Zoom in/out
(continue)
160 Slowest speed
159 Zoom out max.
000 Zoom in min.
•
Start the address
How to address your DMX512 system:
1. Select the channels of DMX controller
2. Dipswitches
Dip
#1
#2
#3
#4
#5
#6
#7
#8
#9
Value
1
2
4
8
16
32
64
128
256
•
Examples:
Channel 01 dip / on: #1=1
Channel 05 dip / on: #1, #3 1+4=5
Channel 09 dip / on: #1, #4 1+8=9
Channel 13 dip / on: #1, #3, #4 1+4+8=13
A. GENERAL INSTRUCTIONS
Please read the enclosed instructions carefully as they include important points about
installation safety, usage and maintenance of the unit.
•
Please keep this booklet with the unit for future consultation. If you sell the unit to
another user, be sure that the new user also receives this instruction booklet thus
giving them the necessary information about the use and general warnings of the
unit.
•
Before the initial start-up, please unpack and carefully check all components in
case any damage may have occurred during transportation.
•
Locate a suitable spot for your device where there is good ventilation. Also, make
sure that no ventilating fans or slots are blocked.
•
Protect our environment! Please dispose of the packing boxes properly.
•
The electrical work that is necessary for installation must be done by qualified
personnel.
•
Always remember to unplug the unit from the main power before any service is
done. Do not open the unit. There are no serviceable parts inside.
•
It is very important to ground the yellow/green conductor to earth in order to meet
regulations for safety.
•
Check the surrounding area and make sure there are no flammable liquids, water or
metal objects that could enter the fixture. If a foreign object enters the unit,
immediately disconnect the main power. Also, place the fixture in a well-ventilated
room at about 15 cm from the walls.
•
Do not touch any wires during operation, as high voltage is hazardous.
•
In the event of serious operating problems, stop using the unit immediately. Never
try to repair the unit yourself. Repairs carried out by unqualified personnel can lead
to damage or malfunction. Please contact CHAUVET. Always use genuine spare
parts.
