( 3 ) By easy controller
CA-6
The easy remote control is used only in master/slave mode. By connecting
to the 1/4” microphone jack of the first unit (its DMX input plug is not used), you
will find that the remote control on the first unit will control all the other units for
stand by, Strobe/Next and Fast/Slow function.
1.
STAND BY
: Stand by and blackout all the unit.
2.
STROBE/NEXT : Press the button and keep pressed
up, when the unit is in fast mode, it will strobe by sound.
Strobe function is only effective while the button is held
down. It has three strobe modes. If the unit was in slow
mode, you can select the next color and gobo. It will
change ten colors and then change one gobo.
3.
FAST/SLOW : When the led light off, it is in FAST
Mode. The unit movement by sound activated. If the led
light on, it is in SLOW mode, the unit movement slowly.
TABLE OF CONTENTS
A. GENERAL INSTRUCTIONS
B. MAIN FEATURES
C. LAMP
D. HOW TO CONTROL THE UNIT
-----
(1) By universal DMX controller
-----
(2) Preprogrammed function
-----
(3) By easy controller CA-6
E. FIXTURE CLEANING
