DMF-10 User Manual (Rev. 01e)
Page 9 of 18
Mounting
Before mounting this product, read and follow the safety recommendations indicated in
the
Safety Notes
section (page 2 of this manual).
Orientation
The DMF-10 may be mounted in any position, provided there is adequate room for
ventilation around it.
Rigging
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support its
weight. Please see the
Technical Specifications
section of this manual for weight
information.
When mounting this product overhead, always use a safety cable. Mount the fixture
securely to a rigging point, whether an elevated platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity. The bracket has a 13 mm hole, which is appropriate for this purpose.
When power linking multiple fixtures, you must always consider the length of the power
linking cable and mount the fixtures close enough for the cable to reach them.
The bracket adjustment knobs allow for directional adjustment when aiming the
fixture/product to the desired angle. Only loosen or tighten the bracket knobs using your
bare hands. Using tools could damage the knobs.
Mounting Diagram
Hanging Bracket
Bracket
Adjustment Knob
