DMF-10 User Manual (Rev. 01e)
Page 11 of 18
Configuration
(DMX)
Set this product in DMX mode to control it with a DMX controller.
1) Connect this product to a suitable power outlet.
2) Turn this product on.
3) Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket of this product.
Starting Address
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you
could restrict the access to some of the fixture’s channels.
The DMF-10 uses up to 6 DMX channels in DMX mode, which defines the highest
configurable address to 507.
If you are not familiar with the DMX protocol, you may refer to the
DMX Primer
section in
the
Technical Information
chapter.
To select the starting address, do the following:
1) Press
<MENU>
repeatedly until
512
shows on the display.
2) Press
<ENTER>
.
3) Use
<UP>
or
<DOWN>
to select the starting address.
4) Press
<ENTER>
.
DMX Channel Assignments and Values
6-CH
Channel
Function
Value
Setting
1
Red
000
255 Red (0-100%)
2
Green
000
255 Green (0-100%)
3
Blue
000
255 Blue (0-100%)
4
White
000
255 White (0-100%)
5
Strobe
000
009
010
255
No function
Strobe effect with increasing speed
6
Light Rotation/
Auto Programs
000
010
011
100
101
249
250
255
Static light
Rotating light
Auto programs
Sound active mode
