D-Fi™ 2.4GHz User Manual (Rev. 04)
Page 7 of 14
3.
S
ETUP
AC Power
This product has an external fixed voltage power supply and it can work with an input
voltage of either 115 V, 60 Hz or 230 V, 50 Hz, depending on the specific model.
To determine the power requirements for this product (power outlet and wiring), use the
current value listed on the label affixed to the product’s back panel, or refer to the
product’s specifications chart. The listed current rating indicates the product’s average
current draw under normal conditions.
Always connect this product to a protected circuit (circuit breaker or fuse),
making sure that it has an appropriate electrical ground to avoid the risk of
electrocution or fire.
Never connect this product to a rheostat (variable resistor) or dimmer circuit, even
if the rheostat or dimmer channel serves only as a 0 to 100% switch.
Mounting
Before mounting this product, read and follow the safety recommendations indicated in
the
Safety Notes
section (page 2 of this manual).
Orientation
The D-Fi™ 2.4GHz may be mounted in any position; however, make sure adequate
ventilation is provided around the product.
Rigging
Before deciding on a location for this product, always make sure that it will be easy to
access the unit for maintenance and programming purposes.
Make sure that the structure onto which you are mounting this product can support its
weight. Please see the
Technical Specifications
section of this manual for weight
information.
When mounting this product overhead, always use a safety cable. Mount the product
securely to a rigging point, whether an elevated platform or a truss.
When rigging this product onto a truss, you should use a mounting clamp of appropriate
weight capacity. The bracket has a 12 mm hole, which is appropriate for this purpose.
The product also has two teardrop holes located on the back for easy wall mounting.
Mounting
Diagram
Mounting
Hole
Safety
Hook
