COLORdash™ Block User Manual
14
6/19/2009 4:54 PM
Menu Map
M
AIN
F
UNCTION
S
UB
-F
UNCTION
S
ELECTION
I
NSTRUCTION
1. STATIC
(Static Color)
Red
000 ~ 255*
(0 ~ 100%)
*Strobe range is
0~20 Hz
User can combine Red, Green, Blue and
White to generate a custom color
Select strobing frequency between 0
and 20 Hz
Green
Blue
White
Strobe
2. AUTO
Auto
(1~10)
Choose from 10 automatic programs
Custom
(1~10)
Choose from 10 programs that be
customized under the “edit custom”
menu option
3. ADDRESS
001 ~ 512
Sets the DMX starting address
4. RUN
DMX/Slave
Sets the operating mode for the fixture:
to receive signal from a DMX controller
(DMX) or to receive signal from the DMX
out of another fixture
5. PERSON
(Personality)
Stage 1
11-channel RGBW+DMS, ID
Block
12-channel RGB for each block (1 of 4)
Arc1
3-channel RGB
Arc1+D
4-channel RGB+D
Arc2
4-channel RGBW
Arc2+D
5-channel RGBW+D
6. ID
(ID Address)
0~66
Assigns the ID address to a fixture
7. SETTINGS
ID
On/Off
Turns ID addressing on or off
Reset to factory?
(Password required)
Resets the fixture to the default, factory
settings
Upload custom?
(Password required)
Uploads a fixture’s custom program to
another fixture (same fixture only)
8. PASSWORD
On/Off
Turns the password on or off (after 30 s
of no activity, the control panel will turn
on after selecting On)
9. EDIT
(Edit Custom)
Custom (1~10)
-(Scene 01-30)
Red
User can combine Red, Green, Blue and
White to generate a custom color
(0~255)
Green
Blue
White
Strobe
Select strobing frequency (0 ~ 20 Hz)
Time
(0~255)
Fade
(0~255)
10. FANS
AUTO
Fan speed controlled automatically
HIGH
Fan speed at its maximum
NORMAL
Fan speed at its median
LOW
Fan speed at its lowest/most quiet
OFF
Fan off
When the fan speed is at normal, low, or off the fixture will automatically override the speed
as a protection, if the temperature becomes too hot.
The default factory password is <UP>, <DOWN>, <UP>, <DOWN>.
